You have 0 items in your cart.
By Brands
Brands
Sub Categories
Category:
Automotive Accessories
Retractable shrouded test leads Complete set of 8 pin-and-socket adapters with flexible tips One red and one black in the following sizes: Size 22 contact 0.030 in (0.76 mm) rated 5 A Size 20 contact 0.040 in. (1.02 mm) rated 7.5A Size 16 contact 0.063 in. (1.60 mm) rated 13 Tested to 60 V DC Size 12 contact 0.093 in. (2.36 mm) rated 23
Category:
Automotive Accessories
Large jaws, long leads and a piercing probe Solid, spring-loaded copper clips with a wide 12.7 mm (.50") jaw opening and serrated teeth Large piercing needle for penetrating larger gauge wires 1.5 m (60"), silicone-insulated leads, useable from -80 °C to +150 °C (-112 °F to +302 °F) Rated for 30 V, 10 A. One red, one black Flexible silicone insulated leads are heat and cold resistant Cat I 30 V, 10 A
Category:
Automotive Accessories
Compatible with all Fluke and most popular DMMs Digital pressure and vacuum measurements in a single module Transducer sealed in 316 stainless steel compatible with variety of liquids and gases Measures vacuum to 76 cm Hg Displays results in English (psig of Hg) or metric (kPa or cm Hg) units Measures pressure to 3447 kPa (500 psig) One year warranty
Category:
Automotive Accessories
Allows for hands-free testing in controlled voltage environments 500 VRMS maximum Banana plug is nickel-plated, beryllium copper for low contact resistance The BNC shell is plated for tarnish resistance Operating temperature +50 °C (+122 °F) maximum
Category:
Automotive Accessories
Allows for hands-free testing in controlled voltage environments 500 VRMS maximum Banana plug is nickel-plated, beryllium copper for low contact resistance The BNC shell is plated for tarnish resistance Operating temperature +50 °C (+122 °F) maximum
Category:
Automotive Accessories
Current Range: 1 to 600 A DC or AC Peak Basic Accuracy (DC to 400 Hz): +/- (2% of reading + 1 A) Output Signal: 100 A range: 10 mV/A | 600 A range: 1 mV/A Frequency Range: 40 Hz to 400 Hz Working Voltage: 600 V AC rms Maximum Conductor Diameter: 34 mm (1.34 inch) Safety Rating: IEC 1010 and CSA-C22.2 No. 1010-1 Installation Category II, Working Voltage 600V
Category:
Batteries, Charges and Adapters
Stray voltage can appear in electrical installations, due to the capacity between wires This may result in erroneous readings on high impedance meters The SV225 solves this without compromising safety On energized wires, the meter will indicate the real voltage On non-energized circuits the meter will read close to zero (even if there are stray voltages) It can be used with all modern meters with standard input spacing. Rated CAT III 1000V, CAT IV 600 V